SWP2

可以捲動

SWP2-10MMF
SWP2-10SMF
一般規格 Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector) 10 10
SFP+ 連接埠數量(10GBASE-SR、opticalCON DUO 連接器) 2 0
SFP+ 連接埠數量(10GBASE-LR、opticalCON DUO 連接器) 0 2
Console 連接埠 1 (RJ-45) 1 (RJ-45)
Automatic negotiation 可用 可用
Auto MDI/MDI-X 可用 可用
DIP switches CONFIG、VLAN PRESET CONFIG、VLAN PRESET
指示燈 正面:電源、LED 模式×4、連接埠×10×2*、SFP+ ×2×2 正面:電源、LED 模式×4、連接埠×10×2*、SFP+ ×2×2
作業溫度 0 至 40°C 0 至 40°C
存儲溫度 -20 至 - 60°C -20 至 - 60°C
Power supply (AC IN inlet) AC100V-240V,50/60Hz,內部電源(無電源開關),電源接口:鎖定型 AC100V-240V,50/60Hz,內部電源(無電源開關),電源接口:鎖定型
Power supply (EXT DC INPUT inlet) 24VDC±2V,0.78A,XLR-4-32 型連接器 24VDC±2V,0.78A,XLR-4-32 型連接器
最大功耗 21W,0.35A 21W,0.35A
散熱 18.5 kcal/h 18.5 kcal/h
機身材質 金屬外殼,無風扇 金屬外殼,無風扇
有害物質管理 RoHS 相容 RoHS 相容
尺寸 480 mm 480 mm
44 mm 44 mm
362 mm 362 mm
重量 4.5 kg(不含配件) 4.5 kg(不含配件)
配件 電源線、使用者手冊 電源線、使用者手冊
選項 PA-700(AC 變壓器) PA-700(AC 變壓器)

* LED 模式按鈕可讓連接埠指示燈在 LINK/ACT-SPEED、STATUS 或 VLAN 間切換。

INTERFACE SPECIFICATIONS

Terminal Format Level Connector
1-10 *1 IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T etherCON CAT5e
11,12 *2 IEEE802.3ae 10GBASE-SR 10GBASE-LR *3 opticalCON
CONSOLE (RS-232C) - RS-232C RJ-45 *4
EXT DC INPUT - - XLR-4-32 type *5

*1 These terminals support AutoMDI/MDI-X
*2 Conforming cable:
SWP2-10MMF: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
SWP2-10SMF: SM-type single-mode fiber cables with a core diameter /cladding diameter of approximately 9 μm/125 μm.
Maximum cable length: 10 km
*3 10GBASE-SR: SWP2-10MMF, 10GBASE-LR: SWP2-10SMF
*4 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*5 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 0.78A

CONNECTOR PIN ASSIGNMENTS

CONSOLE (RS-232C)

* These signals are not used on the SWP2.

to page top

Select Your Location