ProVisionaire Amp Editor V1.0.0 for Win 11/10 and firmware (3) (Previous version)

To update the firmware, please refer to the ProVisionaire Amp Editor Setup Guide.
A stable wired connection is recommended for network connection rather than Wi-Fi connection.
Up to 200 widgets of the PC series can be controlled simultaneously with an external controller such as ProVisionaire Control or ProVisionaire Touch.
Do not use the EEE function (*) of network switches in a Dante network. Although power management should be negotiated automatically in switches that support EEE, some switches do not perform the negotiation properly. This may cause EEE to be enabled in Dante networks when it is not appropriate, resulting in poor synchronization performance and occasional dropouts. Therefore we strongly recommend that:

If you use managed switches, ensure that they allow EEE to be disabled. Make sure that EEE is disabled on all ports used for real-time Dante traffic.
If you use unmanaged switches, make sure to not use network switches that support the EEE function, since EEE operation cannot be disabled in these switches.

*EEE (Energy Efficient Ethernet) is a technology that reduces switch power consumption during periods of low network traffic. It is also known as Green Ethernet and IEEE802.3az.

This zip file includes the following software

ProVisionaire Amp Editor V1.0.0
PC-D series Firmware V1.0.4
XMV series Firmware V4.00
Dante Firmware Update Manager V3.10.6.2
PC-D series Dante Firmware V4.2.0.15-4.0.2.19-1.0.0
XMV series Dante Firmware V4.0.9.1-4.0.3.7-2.0.9-1.1.7

ProVisionaire Amp Editor / Firmware / ProVisionaire Control Compatibilities

Please make sure to use the appropriate version of software and firmware, referring to the following compatibility charts. Using an unsupported combination may result in malfunction. The Firmware set includes the main firmware of the device and Dante firmware. The version of the Firmware set is the same as the version of the main firmware.

Compatibility List

ProVisionaire Amp Editor V1.0.0

V1.0.0 is the first released version.
Now supports Windows 11.

Known Issue

If the TCP port number for data collection of ProVisionaire Monitoring Service is set to 1 on the ProVisionaire Monitoring Service Settings view, the System Monitor window may not be displayed.

PC-D / PC-DI series

Important Notices

The latency value has changed from V1.0.3 due to internal specification changes. To match the latency values between multiple PC-D / DI Series amplifiers in the same system, make sure to update to a compatible firmware version, such as the latest firmware. (Please refer to the Compatibility List)
Due to hardware compatibility, you may not be able to downgrade to V1.0.2 or older. In this case, when the update is executed, “file incompatible” appears on the display of the PC-D / DI unit, and the update is interrupted.

Additional Function in V1.0.4

Added CHR Series to speaker presets.

PC-D / DI series V1.0.3

Latency value has changed due to internal specification changes.

Fixed Bugs in V1.0.3

Solved a problem in which the version number of a PC-D / DI Series unit may not be displayed correctly on the Device Control screen of a CL/QL series console.

Improvements in V1.0.3

Improved communication quality when Wi-Fi signal is unstable.

New Functions in V1.0.2

Now supports the “ProVisionaire Monitoring Service.”
Added VXC2F and VXC8S library in SPEAKER PROCESSOR.

Fixed Bugs in V1.0.2

Fixed a problem in which the time information of the event log when the power was turned off was not displayed correctly.
Fixed a problem in which alerts accrued or canceled after returning to the HOME screen with the HOME / MENU key did not remain in the log list correctly.
Fixed a problem which prevented the PC series from being found in ProVisionaire Amp Editor when excessive Sensing Data used in the ProVisionaire Monitoring Service accumulated over a long period of operation.

XMV V4.00

No change in this version; however, the firmware version number is updated to match other devices.

NOTICE

The Dante model devices uses Dante BrooklynII or Dante Bradway.
Refer to the Audinate website (English) for details on the open‐source licenses for the particular software.
https://www.audinate.com/software-licensing
You use the Dante Controller to set up the Dante settings. When you change a setting by Dante Controller, please refer to the help function or user's guide of Dante Controller.
The names of XMV series models that support Dante are displayed as “XMVxxxx-D” in the Dante Domain Manager.
In the Dante model, Dante Device Labels can be changed arbitrarily and permanently.
However, since the five initial characters are used for device identification (decided by UNIT ID), they should not be changed. The 6th character and subsequent ones can be changed arbitrarily.
Moreover, the following rules concerning Dante Device Labels are common to all Dante devices (and not just this one):
- Conventional characters (alphabetical uppercase or lowercase), numerals, or hyphens (-) can be used.
- A maximum of 31 characters can be entered.
If the CLOCK setting is incorrect on the PC series, the incorrect RUN TIME (total operating time) will be stored if the device is set to standby before being corrected to the correct date / time.
ALART # 42 “Input D * Change To 2nd” may occur when the power is restarted in the Redundant Backup mode on the PC series.
Set different port numbers for [TCP port number for view of ProVisionaire Monitoring Service] and [TCP port number for data collection of ProVisionaire Monitoring Service] on the [ProVisionaire Monitoring Service Settings] view.

OS	Windows 11/Windows 10 (64bit)
CPU	Core i or better
Memory	8GB or more
HDD	ProVisionaire Amp Editor : 420MB or more ProVisionaire Monitoring Service : 700MB or more
Display	1280×1024(SXGA) pixels or higher
Other	Bonjour Print Services(Windows) must be installed, Ethernet(1000BASE-T or higher)

*You can download Bonjour for Windows from Apple's Bonjour support page.
https://support.apple.com/kb/DL999

注意

使用此軟體前，請仔細閱讀軟體授權協議（「協議」）。您僅可依據此協議的條款和條件使用此軟體。此為您（個人或法律實體）和 YAMAHA CORPORATION（「YAMAHA」）間簽署的協議。

下載或安裝此軟體或以其他方式供您使用，您同意接受此授權條款的約束。如果您不同意此條款，請勿下載、安裝、複製或以其他方式使用此軟體。如果您下載或安裝軟體但不同意條款，請立即刪除軟體。

授權授予和版權

Yamaha 特此授予您依據隨附條款和條件，在您擁有或管理的電腦、樂器或設備上使用程式和隨附此協議並構成軟體一部分的資料檔案，以及未來可能提供您進行軟體升級的任何程式和檔案（統稱「軟體」）的權利。雖然儲存軟體的所有權為您所有，但該軟體本身屬於　Yamaha　和/或　Yamaha　的授權方所有，並受相關版權法和所有適用法規的保護。

限制

您不得 從事反向工程、反彙編、反編譯或以任何方式取得軟體任何形式的程式碼。
您不得 重製、修改、變更、租賃、出租或散布完整或部分軟體，以製作軟體的衍生品。
您不得 以電子方式，從一台電腦傳輸軟體至另一台電腦，或在網路上與其他電腦共用軟體。
您不得 使用軟體，散布非法資料或違反公共政策的資料。
在未取得 Yamaha Corporation 的同意時，您不得依據軟體的使用，啟動服務。

透過軟體方式取得的版權保護資料，包含但不限於樂曲 MIDI 資料，有您必須遵守的以下限制條款。

終止

如果違反版權法或此協議條款，協議將自動立即終止，Yamaha 恕不通知。如果以此方式終止，您必須立即銷毀授權的軟體、隨附的書面文件和所有副本。

下載的軟體

如果您認為下載流程有問題，可聯絡 Yamaha，Yamaha 可允許您重新下載該軟體，前提是您需先銷毀透過先前下載嘗試取得的軟體的任何副本或部分副本。重新下載的許可不得以任何方式限制以下第 5 節所述保固聲明。

軟體保固聲明

您明示已同意自負使用軟體的風險。軟體和相關文件以「原狀」提供，且無任何保固。儘管本協議另行規定，YAMAHA 明示放棄軟體的所有明示和暗示保固，包括但不限於對適銷性、特定用途的適用性和不侵犯第三方權利的暗示保固。特別是，但不限制上述規定，YAMAHA 不保證軟體滿足您的要求、軟體的操作不會中斷或沒有錯誤或軟體的缺失得以修正。

責任限制

YAMAHA 的全部義務是根據以下條款允許使用本軟體。在任何情況下，對您或任何其他人遭受的任何損害，包括但不限於任何直接、間接、偶然或間接損害、費用、利潤損失、資料遺失或其他因使用而造成的損害、誤用或無法使用該軟體，即使 YAMAHA 或授權經銷商已被告知此類損害的可能性，YAMAHA 概不負責。在任何情況下，Yamaha 對您的所有損害、損失和訴訟原因（無論是合約、侵權或其他方式）的全部責任均不超過為該軟體支付的金額。

第三方軟體

此軟體隨附第三方軟體和資料（「第三方軟體」）。如果軟體隨附的書面材料或電子資料中，Yamaha 將任何軟體和資料標示為第三方軟體，則您確認並同意您必須遵守第三方軟體隨附的任何協議條款以及提供第三方軟體的一方，對與第三方軟體相關或由第三方軟體衍生的任何保證或責任負責。因第三方軟體或使用，Yamaha 概不以任何方式負責。

Yamaha 不提供第三方軟體的明示保固。此外，對於第三方軟體，YAMAHA 明示放棄所有暗示保固，包括但不限於對適銷性和特定用途的適用性的暗示保固。
Yamaha 不應提供您第三方軟體的相關服務或維護。
對您或任何其他人的任何損害，包括但不限於因使用、誤用或無法使用第三方軟體而導致的任何直接、間接、偶然或後果性損害、費用、利潤損失、資料遺失或其他損害，對您或任何其他人，Yamaha 概不負責。

美國政府限制權利通知：

該軟體是「商業項目」，該術語的定義可見 48 C.F.R. 2.101（1995 年 10 月），由「商業電腦軟體」和「商業電腦軟體文件」組成，這些術語在 48 C.F.R. 12.212 使用（1995 年 9 月）。與 48 C.F.R.一致的 12.212 和 48 C.F.R. 227.7202-1 至 227.72024（1995 年 6 月），所有美國政府最終使用者均應僅以此處規定的權利取得本軟體。

總則

此協議應根據日本法律解釋，不受法律衝突原則的約束。任何爭議或訴訟程序應在日本東京地方法院審理。如果因任何原因，具司法管轄權的法院認定本協議的任何部分無法執行，則本協議的其餘部分仍將維持其完整效力。

完整協議

本協議構成雙方間有關軟體使用和任何隨附書面材料的完整協議，並取代所有先前或同時就本協議達成的書面或口頭理解或協議。除非經 Yamaha 的完全授權代表書面簽字，否則本協議的任何修訂或修正均不具有約束力。