SWP2

		SWP2-10MMF	SWP2-10SMF
一般規格
Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector)		10	10
Console port		1 (RJ-45)	1 (RJ-45)
Automatic negotiation		Available	Available
Auto MDI/MDI-X		Available	Available
DIP switches		CONFIG, VLAN PRESET	CONFIG, VLAN PRESET
指示燈		Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2	Front: POWER, LED MODE×4, PORT×10×2*, SFP+ ×2×2
作業溫度		0 to 40°C	0 to 40°C
存儲溫度		-20 to 60°C	-20 to 60°C
Power supply (AC IN inlet)		AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type	AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type
Power supply (EXT DC INPUT inlet)		24VDC±2V, 0.78A, XLR-4-32 type Connector	24VDC±2V, 0.78A, XLR-4-32 type Connector
最大功耗		21W, 0.35A	21W, 0.35A
散熱		18.5 kcal/h	18.5 kcal/h
Body material		Metal case, no fan	Metal case, no fan
有害物質管理		RoHS compliant	RoHS compliant
體積	寬	480 mm	480 mm
體積	高	44 mm	44 mm
尺寸	深	362 mm	362 mm
重量		4.5 kg (excluding accessories)	4.5 kg (excluding accessories)
配件		Power cord, Owner's manual	Power cord, Owner's manual
選項		PA-700 (AC adaptor)	PA-700 (AC adaptor)
General specifications
Number of SFP+ ports (10GBASE-SR, opticalCON DUO connector)		2	0
Number of SFP+ ports (10GBASE-LR, opticalCON DUO connector)		0	2

* The LED MODE button allows the PORT indicators to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.

INTERFACE SPECIFICATIONS

Terminal	Format	Level	Connector
1-10 ^*1	IEEE802.3	10BASE-T/100BASE-TX/1000BASE-T	etherCON CAT5e
11,12 ^*2	IEEE802.3ae	10GBASE-SR 10GBASE-LR ^*3	opticalCON
CONSOLE (RS-232C)	-	RS-232C	RJ-45 ^*4
EXT DC INPUT	-	-	XLR-4-32 type ^*5

*1 These terminals support AutoMDI/MDI-X
*2 Conforming cable:
SWP2-10MMF: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
SWP2-10SMF: SM-type single-mode fiber cables with a core diameter /cladding diameter of approximately 9 μm/125 μm.
Maximum cable length: 10 km
*3 10GBASE-SR: SWP2-10MMF, 10GBASE-LR: SWP2-10SMF
*4 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*5 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 0.78A