DTX-PRO V2.00 Firmware Updater

• Please save your important data onto a USB flash drive before updating the firmware of the DTX-PRO.
• This updater is to be used at the user’s own risk.
• DO NOT power off or disconnect the cable from the DTX-PRO during the updating process. Doing so may damage the DTX-PRO.
• DO NOT remove the USB flash drive from the DTX-PRO during the updating process. The DTX-PRO and the USB flash drive may become inoperable.
• If the update failed, and the DTX-PRO no longer operates, run the update program again. If doing so does not solve the problem, please contact your Yamaha dealer.
• This firmware and documentation are the exclusive copyrights of Yamaha Corporation.
• Reproducing or modifying all or parts of this firmware or its documentation without permission is strictly prohibited.
• The company names and product names in this document are the trademarks or registered trademarks of their respective companies.

• USB flash drive formatted on the DTX-PRO

Please check the URL below for a list of supported USB flash drives.
https://download.yamaha.com
After selecting your country and clicking on “Documents and Data” from the “Support” page, enter the model name into the search box.

V1.05 to V2.00

• The amount of Preset Kits has been increased from 40 to 70.
• Several new samples have been added, including Yamaha Recording Custom.
• The amount of preset EQ variations has been increased for cymbal instruments, making it easier to create sounds.
• The update features a new "Bleed Sound" and several Kits that allow you to control the volume of sympathetic resonance with the [EFFECT] knob, and achieve a playing feel closer to that of an acoustic drum.
• It is now possible to determine whether or not the volume of the Trigger Input Source can be adjusted via the [EFFECT] knob for each layer (Menu/Kit Edit/KitModifier/Other/EffectKnobVol).
• Mono or poly can now be selected for each Voice (MENU/Kit Edit/Voice/Layer/Mono/Poly).
• It is now possible to select Voices which cannot be played simultaneously (MENU/KitEdit/Voice/Layer/AltGroup).
• Enhanced the ease of use in making various settings using Voice layers (MENU/KitEdit/Voice/LayerType, LayerMix).
• The Voice menu structure (MENU/Kit Edit/Voice) has been changed according to the new functions.
• The Velocity curve for hitting a Pad (MENU/Trigger/Curve/Velocity Curve) can now be set in greater detail.
• Enhanced the ease of use in making settings for preventing crosstalk between Pads(MENU/Trigger/Crosstalk/Auto Setup).
• The Crosstalk menu structure (MENU/Trigger/Crosstalk) has been changed according to the new functions.
• The sound has been enhanced for greater consistency and naturalness when the same Pad is hit repeatedly (MENU/Utility/General/Humanize).
• A new setting allows raising the pitch of a sound by pressing the hi-hat pedal deeply(Menu/Utility/Pad/HH Pitch Up).
• Added new parameters for greater ease in playing the Kits of this product when sending MIDI messages from an external MIDI device/controller.
• MIDI messages can now be received via the [USB TO DEVICE] terminal from an external MIDI device/controller, with the USB Trigger Link function.
• The audition sound strength of the Trigger Input can now be changed (AUDITIONVELOCITY).
• It is now possible to disable recording of the playback sound of the Recorder(RECORDER/SETTING/RecordingSource).
• The output destination for the playback sound of the Recorder can now be set(RECORDER/SETTING/PlayMode/stereo/[PHONES], [OUTPUT], [USB TO HOST]).
• Fixed other minor problems.

V1.04 to V1.05

• Fixed the problem that the first edge shot on Crash Cymbal makes a bow sound after powering on.
• Fixed the problem that the MinLevel parameter of Trigger setting doesn’t work properly when playing on a Multi-Piezo Pad.
• Fixed minor problems.

V1.03 to V1.04

• Fixed a problem in which rim part on Tom 2 would not sound in Preset Kit9 “D-Funk”,when used in DTX8 series.

V1.02 to V1.03

• Fixed a problem in which the MENU/Utility/Pad/FootClosePos setting was reset to the initial value at power-on.
• Fixed minor problems.

V1.01 to V1.02

• Added the DTX8 series drum kits to the Trigger Setup Wizard.
• Changed setting ranges for some parameters.
• Updated the displays on some screens.
• Fixed minor problems.

V1.00 to V1.01

• Added the DTX502 series drum kits to the Trigger Setup Wizard.
• Fine-adjusted the MENU/Trigger/Crosstalk settings. Since the settings are slightly different from those of version 1.00, readjust the crosstalk settings if necessary.
• Added -6dB, -12dB, and 18dB to the MENU/Utility/Output Gain settings.
• Added PA-HP to the MENU/Utility/Input Output/AUX In/Input Mode settings.
• Added AUX In Gain to the MENU/Utility/Input Output settings.
• Changed setting ranges for some parameters.
• Updated the displays on some screens.
• Fixed minor problems.