﻿CVP-709/CVP-705 Owner's Manual

Mixer 
– Editing the Volume and Tonal Balance –

The Mixer gives you intuitive control over aspects of the keyboard parts and Song/Style channels, including volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each Voice to set the optimum balance and stereo image, and lets you set how the effects are applied.
This chapter covers the basic procedures for the Mixer. For details, refer to the Reference Manual on the website (page 9).


Basic Procedure for the Mixer

1	Call up the Mixer display via [Menu] | [Mixer].
(Figure)

2	Touch a tab for editing the balance between the desired parts.

(Table)
Panel	Use this display when you want to adjust the balance between the entire Song part, entire Style part, Mic part, Aux In part, Main part, Layer part, Left part and the USB wireless LAN adaptor part if one is connected.
A USB wireless LAN adaptor may not be included depending on your area.
Style1 (for CVP-709)
Style (for CVP-705)	Use this display when you want to adjust the balance between the parts of the Style. 
Rhythm1, Rhythm2
These are the basic parts of the Style, containing the drum and percussion rhythm patterns.
Bass
The bass part uses various appropriate instrument sounds to match the Style.
Chord1, Chord2
These comprise the rhythmic chord backing, commonly consisting of piano or guitar Voices.
Pad
This part is used for sustained instruments such as strings, organ, choir, etc.
Phrase1, Phrase2
These parts are used for punchy brass stabs, arpeggiated chords, and other extras that make the accompaniment more interesting.
Style2 (CVP-709 only)	Rhythm1, Rhythm2
These are the same as Rhythm1, Rhythm2 of Style1.
Audio
This is the Audio part of an Audio Style (page 57).
Song Ch1-8 / 9-16	Use this display when you want to adjust the balance between all the parts of the MIDI Song. This is available only when a MIDI Song is selected.
Master	Unlike the other displays, use this display when you want to adjust the tonal characteristics of the entire sound (except for Audio Songs) of this instrument. 
(Table end)

3	Touch a tab for editing the desired parameters. 

When a tab other than "Master" is selected in step 2:
(Table)
Filter	For adjusting the Harmonic Content (resonance) and sound brightness.
EQ	For adjusting equalization parameters to correct the tone or timbre of the sound. 
Effect	For selecting an Effect type and adjusting its depth for each part. 
Chorus/Reverb	For selecting a Chorus/Reverb type and adjusts its depth for each part.
Pan/Volume	For adjusting panning and volume for each part.
(Table end)

When "Master" is selected in step 2:
(Table)
Compressor 	Lets you turn the Master Compressor (which is applied to the entire sound) on or off, select the Master Compressor type, and edit the related parameters. Your original edits can be saved as the Master Compressor type. 
EQ	Lets you select the Master EQ type applied to the entire sound and edit the related parameters. Your original edits can be saved as the Master EQ type. 
(Table end)

4	Set the value of each parameter. 

NOTE
To reset each parameter to the default value, touch the number value or setting and hold it.

5	Save your Mixer settings.

To save the Panel Mixer settings:
Register them to Registration Memory (page 88).

To save the Style1/2 (CVP-709) or Style (CVP-705) Mixer settings:
Save them as a Style file to the User memory or USB flash drive. If you want to recall the settings for future use, select the Style file saved here.
1.	Call up the operation display via [Menu] | [StyleCreator]. 
2.	Touch Save icon to call up the Style Selection display, then save as a Style file (page 33).

To save the Song Ch 1-8/9-16 Mixer settings:
First register the edited settings as part of the Song data (Setup), then save the Song to the User memory or USB flash drive. If you want to recall the settings for future use, select the Song file saved here. 
1.	Call up the operation display via [Menu] | [SongCreator] | [Channel Edit].
2.	Touch [Setup].
3.	Touch [Execute] to execute the Setup. 
4.	Touch Save icon to call up the Song Selection display, then save as a Song file (page 33).

To store the Master Mixer settings:
Your original edits can be stored as a Master Compressor type and Master EQ type. If you want to recall the settings for future use, select the corresponding type at the upper right of each display.
1.	Touch Save icon in the "Compressor" display or "EQ" display. 
2.	Select one of USER1 – USER5 in the "Compressor" display or USER1 – USER2 in the "EQ" display, then touch [Save] to call up the Character Entry window. 
3.	On the Character Entry window, change the name as necessary, then touch [OK] to save the data.


Turning Each Channel of the Style or Song On/Off
The Mixer display lets you turn each channel of the current Style or Song on or off.

1	In the Mixer display, touch the [Style1/2] (CVP-709) or [Style] (CVP-705) tab, [Song Ch 1-8] tab or [Song Ch 9-16] tab.

2	Touch the Channel which you want to turn on or off.
(Figure)
Channel
Voice

If you want to solo a specific channel, touch and hold the desired channel until the number turns green. To cancel solo, simply touch the (green) channel number again.

To change the Voice for each channel: 
Touch the instrument icon below the channel number to call up the Voice Selection display, then select the desired Voice. 

NOTE
(CVP-709 only) The Voice of the Audio part of the Audio Style cannot be changed.

3	As necessary, make other settings then save them as a Style file or Song file (step 5 on page 92).

This is the end of the file.