﻿CVP-709/CVP-705 Owner's Manual

Registration Memory 
– Saving and Recalling Custom Panel Setups –

The Registration Memory function allows you to save (or "register") virtually all panel settings to a Registration Memory button, and then instantly recall your custom panel settings by simply pressing a single button. The registered settings for eight Registration Memory buttons should be saved as a single Bank (file).


Registering Your Panel Setups

1	Set up the panel controls (such as Voice, Style and so on) as desired.
Refer to the separate Data List for a list of parameters that can be registered with the Registration Memory function.

2	Press the [MEMORY] button in the REGISTRATION MEMORY section to call up the Registration Memory window.
(Figure)
Displays or hides the list of items

Selecting the items to be registered
Touching [Right arrow] at the bottom left of the window calls up the list for selecting the items to be registered. Before going on to step 3, enter or remove checkmarks by touching the desired items. Items having checkmarks will be registered.

3	Press the desired REGISTRATION MEMORY [1] – [8] button to which you wish to memorize the panel setup.
Memorized buttons are lit in red, indicating that the number button contains data and its number is selected.

NOTICE
If you select the button whose lamp is lit in red or green here, the panel setup previously memorized to the button will be erased and replaced by the new settings. Hence, you should memorize panel setups only to buttons that are turned off.

(Figure)

About the lamp status
Red: Data registered and currently selected
Green: Data registered but not currently selected
Off: No data registered

4	Register various panel setups to other buttons by repeating steps 1 – 3.
The registered panel setups can be recalled by simply pressing the desired number button.

NOTE
You can also disable recall of specific item(s) when calling up the registered panel setups: [Menu] | [RegistFreeze].


Saving the Registration Memory as a Bank File
You can save all eight registered panel setups as a single Registration Memory Bank file.
(Figure)
Bank 01
Bank 02
Bank 03
Bank 04

1	On the Home display, touch [Right arrow] at the upper right corner to show the Registration area, then touch the area to call up the Registration Bank Selection display.
(Figure)

NOTE
In general, Registration Memory data (Bank files) is compatible among the models CVP-709/705/701. However, the data may not be perfectly compatible, depending on the specifications of each model.

This display can be called up also by pressing the REGIST BANK [+] and [-] buttons simultaneously.

2	Touch Save icon to save the Bank file.
For instructions on saving, refer to page 33.


Recalling a Registered Panel Setup
The saved Registration Memory Bank files can be recalled by using the REGIST BANK [-]/[+] buttons or the following procedure.

NOTE
When recalling setups that include Song, Style or text files selected from a USB flash drive, make sure that the appropriate USB flash drive containing the registered Song, Style or text is connected into the [USB TO DEVICE] terminal.
Before using a USB flash drive, be sure to read "Connecting USB Devices" on page 97.
You can also call up the eight setups by using pedals in any order you specify via [Menu] | [RegistSeq]. For details, refer to the Reference Manual on the website (page 9).

1	Call up the Registration Bank Selection display (step 1 on page 89).

2	Touch and select the desired Bank on the display. 
You can also use the REGIST BANK [-]/[+] buttons to select a Bank.

3	Press one of the green-lit numbered buttons ([1] – [8]) in the Registration Memory section.

Confirming the Registration Memory Information
You can call up the information display to confirm which Voices and Style are memorized to the [1] – [8] buttons of a Registration Memory Bank.

1	Call up the Registration Bank Selection display, then select the desired Bank.

2	Touch Information icon to call up the Registration Information window.
This display consists of two pages: Voice-related and Style-related. You can alternate between the two via [Right arrow]/[Left arrow].
(Figure)
For switching the pages.

NOTE
If a certain Voice part is set to off, the Voice name for the corresponding part is shown in gray.

To change the name of the selected Registration, touch Rename icon. To delete the selected Registration, touch Delete icon. 

Naming the Registration Memory data
If you have created a wide variety of Registration Setups, it may be difficult to find the one desired for your particular live performance situation. 
To remedy this, it is good idea to assign names to both the Registration Memory Bank and its Registration Setups individually. 

This is the end of the file.