﻿CVP-709/CVP-705 Owner's Manual

Basic Operations

Display Configuration
This section covers the most often used displays: Home, File Selection and Menu. The Home display appears when the power is turned on. The File Selection display and Menu display can be called up from the Home display.

Home Display
Appears when the power is turned on, and can be called up when the [HOME] button is pressed. This display shows the current basic settings such as the current Voice and Style, allowing you to see them at a single glance. Because of this, you should normally have the Home display shown when you perform on the keyboard.

(Figure)

1	Voice area
Indicates the current Voices for each of the keyboard parts (Main, Left and Layer) and the on/off status of these parts (page 48). Touching a Voice name calls up the Voice Selection display.

NOTE
On the Voice area, Style area or Song area, flicking right expands the Style area, while flicking left expands the Song area.

2	Style area
Indicates the current Style (page 55). Touching a Style name calls up the Style Selection display. Touch [Left arrow] at the upper left of this area to expand the area. To reset the area to the default status, touch [Right arrow], which appears at the upper right of the Voice area. 

3	Song area
Indicates the current Song (page 66). Touching a Song name calls up the Song Selection display. Touch [Right arrow] at the upper right of this area to expand the area. To reset the area to the default status, touch [Left arrow], which appears at the upper left of the Voice area. 

4	Registration area
Indicates the currently selected Registration Memory Bank name, Registration name and Registration Sequence when it is active (page 88). Touching this area calls up the Registration Bank Selection display. You can hide or show this area by touching [Left arrow] or [Right arrow] in the area. 


NOTE
Flicking right or left on the Registration area can also hide or show this area. 

5	Menu area
Contains the shortcut icons which let you call up various functions with a single touch. Touching a shortcut icon will call up the display of the corresponding function. Touch [Menu] icon at the right end to call up the Menu display, from which you can register shortcut icons as desired here (page 31).

File Selection Display
The File Selection display is for selecting a Voice, Style, Song, and other data. You can call up this display by touching the name of the Voice, Style or Song on the Home display, or by pressing one of the VOICE or STYLE buttons, etc.

(Figure)

1	Category
A wide variety of data such as Voices and Styles are divided into several categories (tabs) according to the data type. Except for the following two, all tabs are referred to as "preset" tabs, since they contain preset data.

(Table)
Favorite tab	Location where the Voices or Styles which you have registered as Favorites are shown (page 36). This tab is available only for Voices and Styles.
User tab	Location where recorded or edited data is saved. Data saved to the instrument are shown in "USER" (User memory), while data in the connected USB flash drive are shown in "USB." In this manual, data in the User tab is referred to as "User data."
(Table end)

2	Sub Category / Folder (Path)
When one of the preset tabs is selected, the sub categories are shown here according to the data type. For example, various piano types such as Grand Piano and Electric Piano are shown when you touch the "Piano" tab on the Voice Selection display.
When the Favorite tab is selected, this is not available. 
When the User tab is selected, the current path or folder is shown here according to the folder structure.

(Figure)
Path
To the upper folder

3	Selectable data (files)
The files that can be selected are shown. If two or more pages are available, you can call up another page by touching [Up arrow] or [Down arrow] at the right.

NOTE
You can call up another page also by flicking vertically on the list.

4	Operation icons
The functions (save, copy, delete, etc.) which can be operated via the File Selection display are shown. The icons shown here differ depending on which File Selection display is selected. For detailed instructions, refer to pages 33 – 37, or the instructions for each function's File Selection display.

Menu Display
This is the portal display for using various functions and can be called up by touching the [Menu] icon at the bottom right corner of the Home display.

NOTE
You can call up the Menu display also by flicking upward from the bottom on the Home display. Flicking downward on the Menu display calls up the Home display.

(Figure)

1	Functions
Various convenient functions are shown via icons. Touching each of them calls up the corresponding function. This list consists of two pages, which you can select by pressing [Right arrow] or [Left arrow].
For information on each function, refer to the "Menu Display Function List" (page 100) or the Reference Manual on the website (page 9).

NOTE
You can also change pages by flicking horizontally.

2	Shortcuts
By registering often used functions here as Shortcuts, you can call up them quickly from the Home display. For instructions, refer to page 31.

Instruction conventions for the Menu display
Throughout this manual, instructions with multiple steps are given in convenient shorthand, with arrows indicating the proper sequence.

Example: [Menu] | [Utility] | [System] | [Language]

The example above describes a three step operation: 
1) From the Menu display, touch [Utility].
2) Touch [System].
3) Touch [Language].


Closing the Current Display
To close the current display, touch [X] at the upper right of the display (or window) or [Close] at the lower right of the display (or window). When a message (information or confirmation dialog) appears, touching the appropriate item such as "Yes" or "No" closes the message.
If you want to quickly return to the Home display press the [HOME] button on the panel.


Display-based Controls
The display of this instrument is a special touch screen that allows you to select or change the desired parameter by simply touching the corresponding setting on the display. 

(Figure)
Display
Data dial
[HOME] button

Using the Display (Touch Screen)

NOTICE
Do not use any sharp or hard tools to operate the touch screen. Doing so may damage the display.

NOTE
Keep in mind that operation by simultaneously touching two or more points on the display is not possible.

Touch
To select an item, lightly touch the corresponding indication on the display.
You can turn on/off system sounds produced when touching the display from [Menu] | [Utility] | [Display/Touch Screen] | Touch Screen [Sound]

(Figure)

Slide
Hold down the display slider, then slide your finger vertically or horizontally to change the parameter value.

(Figure)

Slide your finger vertically or horizontally on the display to turn pages, or to show or hide some part of a particular display. 

(Figure)

Rotate
Touch and hold the display knob, and rotate your finger around the knob to change the parameter value.

(Figure)

Touch and hold
This instruction means to touch the object in the display and hold it for a while.
When setting values by using [Left arrow]/[Right arrow], a slider or a knob, you can restore the default value by touching and holding the value on the display.

(Figure)

Rotating the Data Dial
Depending on the display, the Data dial can be used in the following two ways.

Adjusting the parameter values
After selecting the desired parameter, use the Data dial to adjust the value. This is useful if you have difficulty adjusting by touching on the display, or want finer control over the adjustment.

(Figure)

Selecting an item from a list
In File Selection displays (page 27) and the List windows for setting parameters, use the Data dial to select an item.
 
(Figure)
Data dial

Pressing the [HOME] Button
You can quickly return to the Home display (the display shown when the power is turned on) by pressing the [HOME] button whenever you want. 

(Figure)


Calling up the Desired Functions from the Home Display
From all the functions shown on the Menu display, you can pick out an often used one and register it to a shortcut. Registered shortcuts are shown in the Menu area (page 27) at the bottom of the Home display, allowing you to quickly call up the desired function from the Home display.

Replacing a Shortcut on the Home Display
Although seven shortcuts are registered by default, you can customize them as necessary.

1	Touch and hold the icon of the desired function until the color of the shortcut area (bottom of the display) changes.

NOTE
To cancel this operation, touch any blank location on the display before going on to step 2.

(Figure)

2	From the seven locations at the bottom of the display, touch the one you want to replace.
The function selected in step 1 will be registered, replacing the one selected here.

Moving a Shortcut

1	Touch and hold the desired icon until the color changes.

NOTE
To cancel this operation, touch any blank location on the display before going on to step 2.

(Figure)

2	From the seven locations, touch the desired destination icon.
The icons touched in steps 1 and 2 are switched.

Deleting a Shortcut

1	Touch and hold the desired icon until the color changes.

NOTE
To cancel this operation, touch any blank location on the display before going on to step 2.

(Figure)

2	Touch the same icon again to delete it from the shortcuts.


Using the ASSIGNABLE Buttons
You can assign the functions which you use frequently to these four panel buttons at the left side of the display. Also, any of the functions listed on the Menu display can be assigned here as a shortcut.

(Figure)

1	Call up the operation display via [Menu] | [Assignable] | [Assignable].

(Figure)

2	Touch the desired button number to call up the list.

3	Select the desired item from the functions and shortcuts (equivalent to the functions in the Menu display).

NOTE
For details about the functions which can be assigned to these buttons, refer to the Reference Manual on the website (page 9).


File Management
Data you have created such as recorded Song and edited Voice can be saved as files to the instrument (referred to as "User memory") and a USB flash drive. If you've saved a lot of files, you may have trouble finding the desired file quickly. To make operation easier, you can organize your files in folders, rename the files, delete unnecessary files, etc. These operations are done in the File Selection display.

NOTE
Before using a USB flash drive, be sure to read "Connecting USB Devices" on page 97.

Saving a File
You can save your original data (such as Songs you've recorded and Voices you've edited) as a file to the instrument or USB flash drive. 

1	In the relevant display, touch Save icon to call up the display for selecting the saving destination. 

2	Select the location to which you want to save the file.
To show the next higher level folder, touch Above icon.
You can create a new folder by touching New Folder icon.

NOTE
Files of edited Audio Styles (CVP-709 only; page 57) can be saved only in the User memory of the instrument.

(Figure)

3	Touch [Save here] to call up the Character Entry window.

NOTE
To cancel this operation, touch [Cancel].

4	Enter the file name (page 37).
Even if you skip this step, you can rename the file at any time (page 34) after saving. 

5	Touch [OK] in the Character Entry window to actually save the file. 
The saved file will be automatically located at the appropriate position among the files in alphabetical order.

Creating a New Folder
Folders can be created, named and organized as desired, making it easier to find and select your original data.

NOTE
In User memory, no more than three folder levels can be created. The maximum total number of files/folders which can be saved differs depending on the file size and the length of the file/folder names.
The maximum number of files/folders which can be stored in a folder is 500.

1	In the File Selection display, touch the User tab (page 27) then select the location to which you want to create a new folder.
To show the next higher level folder, touch Above icon.

NOTE
You cannot create a new folder in the "Piano Room" folder.

2	Touch [File] to call up the File Management icons.

(Figure)

NOTE
To cancel the file operation, touch [Right arrow] at right corner to hide the File Management icons.
You can hide or show the File Management icons by flicking the bottom of the display horizontally.

3	Touch New Folder icon to call up the Character Entry window.

4	Input the name of the new folder (page 37).

Renaming a File/Folder
You can rename files/folders.

NOTE
Files in the Preset tabs cannot be renamed.
The "Piano Room" folder cannot be renamed.

1	Call up the File Selection display, on which the desired file/folder is shown.

2	Touch [File] to call up the File Management icons.

NOTE
To cancel the file operation, touch [Right arrow] at right corner to hide the File Management icons.
You can hide or show the File Management icons by flicking the bottom of the display horizontally.

3	Enter a checkmark to the desired file or folder by touching it. 

4	Touch Rename icon to call up the Character Entry window.
Only one file or folder can be renamed at a time. 

5	Input the name of the selected file or folder (page 37).

Copying or Moving Files
You can copy or cut a file and paste it to another location (folder). You can also copy a folder (but not move it) by using the same procedure.

NOTE
Files in the Preset tabs cannot be moved.
Copying of commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. Commercially available Song data may be copy protected to prevent illegal copying or accidental erasure.
Audio Styles (CVP-709 only; page 57) can be copied only to the User memory of the instrument.
Some of the files recorded in Piano Room with accompaniment cannot be copied, depending on the type of accompaniment.
Files recorded in the Piano Room (page 44) with Audio Styles cannot be copied.

1	Call up the appropriate File Selection display, on which the desired files/folders are shown.

2	Touch [File] to call up the File Management icons. 

NOTE
To cancel the file operation, touch [Right arrow] at right corner to hide the File Management icons.
You can hide or show the File Management icons by flicking the bottom of the display horizontally.

3	Enter checkmarks to the desired files/folders by touching each item.
One or more files/folders can be checked. When you want to enter checkmarks to all displayed items, touch Check All icon. Touch Check All icon again to remove all the checkmarks.

4	Touch Copy icon or Move icon, to call up the display for selecting the destination.

5	Select the desired destination (path) to paste the files/ folders.
You can create a new folder by touching New Folder icon.

NOTE
To cancel this operation, touch [Cancel] before going to step 6. 

6	Touch [CopyHere] or [MoveHere] to paste the files/folders you've selected in step 3.
The pasted file/folder appears on the display at the appropriate position among the files in alphabetical order.

Deleting Files/Folders
You can delete files/folders.

NOTE
Files in the Preset tabs cannot be deleted.
The "Piano Room" folder cannot be deleted.

1	Call up the appropriate File Selection display, on which the desired files/folders are shown. 

2	Touch [File] to call up the File Management icons.

NOTE
To cancel the file operation, touch [Right arrow] at right corner to hide the File Management icons.
You can hide or show the File Management icons by flicking the bottom of the display horizontally.

3	Enter checkmarks to the desired files/folders by touching each item.
One or more files/folders can be checked. When you want to enter checkmarks to all displayed items, touch Check All icon. Touch Check All icon again to remove all the checkmarks.

4	Touch Delete icon.

5	After the confirmation message appears, touch [Yes] to actually delete the files/folders you've selected in step 3. 
To cancel this operation, touch [No] instead of [Yes].

Registering Files to the Favorite Tab
You can call up your favorite or often used Voices or Styles quickly by registering them to the Favorite tab. Touch the star mark (white star) at the right side of each file to register the corresponding file to the Favorite tab. To remove the registered file from the Favorite tab, touch the colored star mark (orange star) in the Favorite tab or in the tab which actually contains the corresponding file.

NOTE
If you change the name of the original file or move/delete the original file, touching the corresponding file name in the Favorite tab cannot call up the file.
Within the Favorite tab, to actually remove the file, you need to touch the colored star then close or switch the display.

(Figure)
Favorite tab
Registered
Not registered

Sorting the File Order in the Favorite Tab
You can change the order of the files such as Voices and Styles in the Favorite tab.

1	In the Voice Selection display or Style Selection display, touch the Favorite tab.

2	Touch Order icon to call up the Order Edit display.

3	Touch the file you want to move.
(Figure)

4	Touch the location to which you want to move the file selected in step 3. 

5	Repeat steps 3 – 4 as necessary.

6	Touch [Complete] to exit from the Order Edit display.

Restrictions for protected Songs
Commercially available Song data may be copy protected to prevent illegal copying or accidental erasure. They are marked by the indications at the left side of the file names. The indications and relevant restrictions are detailed below.

Single gray key icon
Protected 1: Indicates Preset Songs saved to the "USER" (User memory) and Disklavier Piano Soft Songs. These cannot be copied/moved/saved to external devices.

Single yellow key icon 
Protected 2 Original: Indicates Yamaha-protection-formatted Songs. These cannot be copied. These can be moved/saved only to the "USER" (User memory) and USB storage devices with ID.

Double yellow keys icon 
Protected 2 Edited: Indicates edited "Protected 2 Original" Songs. These cannot be copied. These can be moved/saved only to the "USER" (User memory) and USB storage devices with ID.

Note for "Protected 2 Original" and "Protected 2 Edited" Song file operation
Make sure to save the "Protected 2 Edited" Song to the same folder containing its original "Protected 2 Original" Song. Otherwise the "Protected 2 Edited" Song cannot be played back. Also, if you move a "Protected 2 Edited" Song, be sure to move its original "Protected 2 Original" Song to the same location (folder) at the same time.


Entering Characters
This section covers how to enter characters for naming your files/folders, inputting keywords on Music Finder (page 85), etc. Entering characters is done in the display shown below.

(Figure)

1	Touch the character type.

When the Language (page 22) is set to other than Japanese: 
Touching [Symbol] (or [abc]) switches between entering symbols or Roman letters (and numbers). 
To switch between entering capital letters or small letters, touch Shift key. 

When the Language (page 22) is set to Japanese: 
Roman letters and numbers in half size (full size)
Symbols in half size (full size)
Katakana in full size (half size)
Hiragana and Kanji

To switch between full size or half size, touch and hold the Character Type. For example, [Half size Kanakan] can be called up by holding [Full size Kanakan].
When entering Roman letters, you can switch between capital and small letters by touching  Shift key.

2	Touch [Left arrow]/[Right arrow] or rotate the Data dial to move the cursor to the desired location.

3	Input the desired character one by one.
To delete a single character, touch [Delete]; to delete all characters at once, touch and hold [Delete]. To enter a space, touch the space key indicated in the illustration on the previous page.

NOTE
Depending on the display for character entry you are working in, some types of characters cannot be entered.
A file name can contain up to 46 characters and a folder name can contain up to 50 characters.
The following characters (half size) cannot be used: \ / : * ? " < > I

To input letters with auxiliary symbols (when Language is set to other than Japanese):
You can input letters with auxiliary symbols such as umlaut by touching and holding a letter to call up a list. For example, touch and hold "E" to enter "Ё" from the list.

To convert into Kanji (when the Language is set to Japanese):
When the entered "hiragana" characters are shown in reverse display (highlighted), touch [Henkan] (convert) several times to call up the conversion options. You can change the reversed area by touching [Left arrow] or [Right arrow]. When you find the desired Kanji, touch [Kakutei] (confirmed). 
To change the converted kanji back to "hiragana," touch [Modosu] (revert). 
To clear the reversed area at once, touch [Kyansel] (cancel).

NOTE
To cancel this operation, touch [Cancel] before going on to step 4.

4	Touch [OK] to finalize the characters (name, keywords, etc.) you have input.


Using the Pedals
(Figure)
Soft Pedal
Sostenuto Pedal
Damper Pedal

NOTE
If the pedal box rattles or gives way when you step on the pedals, turn the adjuster so that it is set firmly against the floor (pages 104, 107, 110).

Damper Pedal (Right)
Pressing this pedal sustains notes. Releasing this pedal immediately stops (damps) any sustained notes. Pressing this pedal while you play a VRM Voice (page 52) recreates the characteristic string resonance of a real acoustic piano. A "half-pedal" function of this pedal creates partial sustain effects, depending on how far down you press the pedal.

(Score)
If you press and hold the damper pedal here, all the notes shown will be sustained.

NOTE
Certain Voices, such as strings and brass, sustain continuously when the damper/sostenuto pedal is pressed.
Certain Voices such as drum kits may not be affected by use of the damper/sostenuto pedal.

Half-pedal function
This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the pedal, the more the sound sustains. For example, if you press the damper pedal and the notes you play sound a bit murky and loud with too much sustain, you can partially release the pedal to lessen the sustain (murkiness).

GP Responsive Damper Pedal (CVP-709 only)
This special pedal has been designed to provide enhanced tactile response and, when pressed, is much closer in feel to the pedal of an actual grand piano. It makes it easier to physically experience the half-pedal point and more easily apply the half-pedal effect than other pedals.
Since the pressing sensation may vary depending on the situation, including the location where the instrument is installed, you can adjust the half-pedal point to the desired setting on the display called up via [Menu] | [Assignable] | [Pedal]. For details, refer to the Reference Manual on the website (page 9).

NOTE
The pedals are fitted with covers when shipped from the factory. Remove the cover from the pedals for optimum use of the GP Responsive Damper Pedal's effect.

Sostenuto Pedal (Center)
When the Piano Voice is selected, if you play a note or chord on the keyboard and press this pedal while holding the note(s), the notes will sustain as long as the pedal is held. All subsequent notes will not sustain.
When a Voice other than piano is selected, a specific function appropriate for the Voice is automatically assigned to the center pedal. 

(Score)
If you press and hold the sostenuto pedal here, only the notes held at this timing will be sustained.

Soft Pedal (Left)
When the Piano Voice is selected, pressing this pedal reduces the volume and slightly changes the timbre of the notes you play. When a Voice other than piano is selected, a specific function appropriate for the Voice is automatically assigned to the left pedal.
You can adjust the depth of the Soft pedal effect on the display called up via [Menu] | [Assignable] | [Pedal]. For details, refer to the Reference Manual on the website (page 9).

Assigning a function to each pedal
Various functions can be assigned to each of the three pedals and a foot controller/footswitch (sold separately) — including start/stop of Song playback and controlling a Super Articulation Voice. These can be set on the display called up via [Menu] | [Assignable] | [Pedal]. For details, refer to the Reference Manual on the website (page 9).


Using the Metronome
The [METRONOME ON/OFF] button lets you start or stop the metronome. The metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and check how a specific tempo sounds.

NOTE
You can also change the time signature, volume and sound of the metronome on the display called up via [Menu] | [Metronome] | [Metronome].

(Figure)


Adjusting the Tempo
The TEMPO [-] and [+] buttons let you change the playback tempo of Metronome, Style and MIDI Song. The tempo of the Style and MIDI Song can also be adjusted via the [TAP TEMPO] button.

NOTE
If you want to adjust the tempo of an Audio Song, use the Time Stretch function on page 74.

(Figure)

TEMPO [-]/[+] buttons 
Press the TEMPO [-] or [+] button to call up the Tempo pop-up display. Use the TEMPO [-]/[+] buttons to decrease or increase the tempo over a range of 5 – 500 beats per minute. Holding down either button changes the value continuously. Pressing both TEMPO [-] and [+] buttons calls up the default tempo of the last selected Style or Song. 

(Figure)

When you select an Audio Style (CVP-709 only; page 57), the upper limit of the tempo will be shown below the tempo value. The Audio part is muted if the tempo is over the upper limit.

[TAP TEMPO] button
During playback of a Style or MIDI Song, you can change the tempo by tapping the [TAP TEMPO] button twice at the desired tempo. When Style and Song are stopped, tapping the [TAP TEMPO] button (four times for a 4/4 time signature) starts playback of the rhythm part of the Style at the tempo you tapped.


Setting the Touch Sensitivity of the Keyboard
Touch Sensitivity determines how the sound responds to your playing strength. This setting does not change the weight of the keyboard.

1	Call up the display via [Menu] | [Keyboard].

(Figure)

2	Make the settings by touching the display.

(Table)
Touch Curve	Enter checkmarks to the boxes of the desired keyboard parts, then touch here to call up the setting window and select the Touch Sensitivity type. If you remove the checkmark, playing the corresponding part will produce a fixed velocity regardless of your playing strength.

NOTE
The Touch Sensitivity settings may have no effect with certain Voices.

Hard2: Requires strong playing to produce high volume. Best for players with a heavy touch.
Hard1: Requires moderately strong playing for high volume.
Medium: Standard Touch Sensitivity.
Soft1: Produces high volume with moderate playing strength.
Soft2: Produces relatively high volume even with light playing strength. Best for players with a light touch.
Fixed Velocity	Make sure that the box of the desired keyboard parts are checked, then touch here to call up the setting window and set the velocity with which you play the keys, which stays fixed regardless of your playing strength.
(Table end)

For details on the Left Hold function, refer to page 51.


Transposing the Pitch in Semitones
The TRANSPOSE [-]/[+] buttons transpose the overall pitch of the instrument (the keyboard sound, Style playback, MIDI Song playback, and so on) in semitone steps (from -12 to 12). Pressing the [-] and [+] buttons simultaneously resets the value to 0.

NOTE
If you want to transpose the pitch of the Audio Song, use the Pitch Shift parameter on page 73.
The Transpose functions do not affect the Drum Kit or SFX Kit Voices.

(Figure)

You can independently select the part to be transposed as desired. Touch the Transpose pop-up several times until the desired part appears, then use the TRANSPOSE [-]/[+] buttons to transpose it.

NOTE
Transpose can be done on the display also via [Menu] | [Transpose].

(Table)
Master	Transposes the pitch of the entire sound with the exception of the Audio Song and input sound from a microphone or the [AUX IN] jack.
Keyboard	Transposes the keyboard pitch including the chord root for triggering Style playback.
Song	Transposes the pitch of the MIDI Song. 
(Table end)

Fine tuning the pitch
By default, the pitch of the entire instrument is set to 440.0 Hz according to equal temperament. This setup can be changed from the display called up via [Menu] | [Tuning]. For details, refer to the Reference Manual on the website (page 9).

Hz (Hertz):
This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. This instrument is tuned to 440.0Hz by default to conform to the conventional tuning value (440.0Hz) of acoustic pianos.


Adjusting the Volume Balance
From the Balance display called up via [Menu] | [Balance], you can adjust the volume balance among the keyboard parts (Main, Layer, Left), the Style, the Song, the microphone sound, and the sound input via [AUX IN] jack. Slide your finger vertically for each part to adjust the volume. You can also adjust the volume balance of sound input via the USB wireless LAN adaptor, if one is connected.
Since the volume of MIDI Songs and Audio Songs are handled individually, you need to set the volume balance for each case (when a MIDI Song is selected, or when an Audio Song is selected).

NOTE
A USB wireless LAN adaptor may not be included depending on your area.

(Figure)


Restoring the Factory-programmed Settings
While holding the C7 key (right-most key on the keyboard), turn the power on. This restores all of the settings to their factory defaults.

(Figure)
C7

NOTE
You can also restore the factory default value of specified settings or delete all files/folders in the User memory on the display called up via [Menu] | [Utility] | [Factory Reset/Backup] | page 1/2. For details, refer to the Reference Manual on the website (page 9).

If you want to restore the default value of any parameter you've changed, touch and hold the value on the display (page 30).


Data Backup
You can back up all data in the User memory of this instrument (except for Protected Songs) and all settings to the USB flash drive as a single file. This procedure is recommended for data security and backup in case of damage.

NOTE
Before using a USB flash drive, be sure to read "Connecting USB Devices" on page 97.
You can back up User data such as Voice, Song, Style, and Registration Memory by copying them individually to USB flash drive. For instructions, refer to page 35. 
You can back up the System settings, MIDI settings, User Effect settings, and Music Finder Records individually.

1	Connect the USB flash drive to the [USB TO DEVICE] terminal as backup destination.

2	Call up the display via [Menu] | [Utility] | [Factory Reset/ Backup] | page 2/2. 

(Figure)

3	Touch [Backup] of "All" to save the backup file to the USB flash drive.

Restoring the Backup File
To do this, touch [Restore] of "All" in step 3 above. When the operation is complete, the instrument will be restarted automatically.

NOTICE
Files including Protected Songs in the User memory of the instrument are replaced by restoring the backup file. Move or copy the files in the User memory of the instrument to USB flash drive before restoring (page 35).
Completing the backup/restore operation may take a few minutes. Do not turn off the power during backup or restoring. If you turn off the power during backup or restoring, data may be lost or damaged.

This is the end of the file.