MODUS
H11
Owner's Manual

Data Backup

Backup Data in Internal Memory
The following data will be saved to internal memory of the instrument. The data is maintained even when the power is turned off.
BGM Mode
Moving Key On/Off
Fine Tuning of the Pitch
Character Code
Internet Settings
Channel (for streaming service)
Cookies
Song Auto Revoice On/Off


Initializing the backup data in Internal Memory
Turn off the power to the instrument. Then turn the power on while holding the C7 key.

(Figure)
C7

(Figure)
(Displayed while initialization is in progress)
CL3 -> C.L3 -> C.L.3 -> C.L.3. ->CL3

CAUTION
Never attempt to turn off the power during initialization. Doing so will cancel initialization.

CAUTION
Initializing restores the instrument to the factory-programmed settings for all settings. Yamaha recommends you that you back up the settings before initializing. See "Backing Up Data to USB Flash Memory" on page 45 for details.

NOTE
To initialize the Internet settings, refer to "Initializing Internet Settings" on page 40.

NOTE
Initialization does not reset the character code setting. If you want to reset the character code setting, see page 20.


Backing Up Data to USB Flash Memory
For maximum data security Yamaha recommends that you save your important data to a USB flash memory as backup. This important data includes backup data in internal memory of the instrument (page 44), voice settings (page 30).

Operation

1	Engage the Backup mode.
Make sure that the USB flash memory device is connected to the instrument, then press the [VOICE] button while holding the [BGM] button.

CAUTION
To cancel backup, press any button (except [PLAY/STOP], [minus/NO], or [plus/YES]) before pressing the [PLAY/STOP] button in step 2.

NOTE
The backup mode cannot be engaged while song playback is active in BGM mode.

NOTE
BGM mode cannot be backed up to a USB flash memory.

2	Start backup.
Press the [PLAY/STOP] button.
The "n-y" prompt will appear on the display if the USB flash memory device contains a file with the same name as the one you are attempting to backup. Press the [plus/YES] button to execute the overwrite operation. Press the [minus/NO] button to cancel backup. When the backup is finished, an "End" message appears on the display.

3	Exit from the Backup mode.
Press the [minus/NO] or [plus/YES] button.

NOTE
The backup data file is automatically named "H11.bup."


Restoring the Backup Data
The backup data in a USB flash memory device can be restored to the instrument.

Operation

1	Engage the Backup mode.
Make sure that the USB flash memory device containing the restore data "H11.bup" is connected to the instrument, then press the [VOICE] button while holding the [BGM] button.

2	Enable the Restore mode.
Press the [plus/YES] button.

(Figure)


CAUTION
To cancel restore, press any button (except [PLAY/STOP], [minus/NO], or [plus/YES]) before pressing the [PLAY/STOP] button in step 3.

3	Start the restore operation.
Press the [PLAY/STOP] button.
When the restore operation is finished, an "End" message appears on the display.

4	Exit from the Restore mode.
Press the [minus/NO] or [plus/YES] button.

This is the end of the file.