MODUS
H11
Owner's Manual

Connections

Connectors

CAUTION
Before connecting the H11 to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may result.

1	AUX OUT[L/L+R][R] jacks
You can connect these jacks to a stereo system to amplify the H11 or to a cassette tape recorder to record your performance. Refer to the diagram below and use audio cables to make the connections.

CAUTION
When the H11's AUX OUT jacks are connected to an external audio system, first turn on the power to the H11, then to the external audio system. Reverse this order when you turn the power off.

(Figure)
H11
AUX OUT
phone plug (standard)
audio cable
phone plug (standard)
AUX IN
Stereo

NOTE
Use audio cables and adaptor plugs with no resistance.

NOTE
Use only the AUX OUT [L/L+R] jacks for connection with a mono device.

2	USB [TO DEVICE] terminal
This terminal is for connection to a USB flash memory device. For more information, refer to "Precautions when using the USB [TO DEVICE] terminal" on page 22.

3	[LAN] port
This port allows direct connection of the H11 to the Internet, letting you use a special streaming service on the Yamaha website for playing back songs in a variety of musical genres as background music on the instrument. Before connecting the instrument to the Internet, be sure to read "Internet Direct Connection (IDC)" on page 33.

CAUTION
Do not directly connect the [LAN] port to your computer. The Internet functions cannot be used if so connected.

This is the end of the file.