MODUS
H11
Owner's Manual

Listening to the Songs on Internet
Yamaha provides a special website with a streaming data service that enables you to play back a range of songs (song data) in various musical genres as background music on your instrument.
Before connect the instrument to the Internet, be sure to read "Internet Direct Connection (IDC)" on page 33.

TERMINOLOGY
Streaming: Streaming lets you listen to the song data while it is being sent from the Internet. It allows you to call up the data repeatedly but it does not allow you to save the data to a file.

(Figure)
INTERNET

Operation

1	Turn on the [INTERNET] lamp.
Make sure that the instrument is connected to the Internet, then select the [INTERNET] lamp by pressing the [BGM] button (the [INTERNET] lamp flashes during Internet access).

2	Change the Channel.
Press the [minus/NO] or [plus/YES] button to change the channel. The current channel setting appears on the display.

NOTE
The LED displays shown in this owner's manual are for instructional purposes only and may appear somewhat different from those on your instrument.

3	Start playback.
Press the [PLAY/STOP] button to start playback (the [INTERNET] lamp flashes during Internet access).

TIP
Feel free to play the keyboard along with the streaming song. You can also change the voice playing on the keyboard.

TIP
You can adjust the Reverb Type (page 31) that is applied to the voice you play on the keyboard as well as for the streaming song on Internet playback. The Touch sensitivity (page 32) for the keyboard voice can also be adjusted to your liking.

NOTE
When you select a different song (or a different song is selected during chained playback), an appropriate Reverb Type will be selected accordingly.

4	Stop playback.
Press the [PLAY/STOP] button.

5	Turn the [INTERNET] lamp off.
Turn the [INTERNET] lamp off by pressing the [BGM] button.

Song Auto Revoice
When you play back any commercially available XG song data or that created on other instruments, you can use Auto Revoice to automatically assign the specially created Piano Voice of the instrument instead of the conventional XG piano voices of the same type. If you want to keep the XG voice and disable this automatic reassignment, set Auto Revoice to off.

Operation
Press the F sharp 0 key while holding the [BGM] button to switch the function on/off. When set to on, the instrument automatically replaces the conventional XG piano voice with the Piano Voice. When set to off, the XG voice is maintained.
The current ON/OFF setting appears on the display while both controls are held.

(Figure)
F sharp 0

TIP
Normal setting: ON (using the specially created Piano Voice of the instrument) To switch the specially created Piano Voice of the instrument to the conventional XG Piano Voices of the same type, turn the function OFF.

NOTE
This setting will not affect the voice you play on the keyboard. The keyboard voice used is the specially created Piano Voice of the instrument.

This is the end of the file.