MODUS
H11
Owner's Manual

Formatting USB storage media
When a USB storage device is connected or media is inserted, a message may appear prompting you to format the device/media. If so, execute the Format operation.

1	Engage the format mode.
After making sure that the USB flash memory is connected to the instrument, press the [PLAY/STOP] button while holding down the [MOVING KEY] button.

NOTE
The initialize mode cannot be engaged while song playback is active in BGM mode.

2	Search USB storage media to be formatted.
Press the [PLAY/STOP] button to start the search. A "n-y" message will appear on the display if a USB flash memory device to be formatted is found. To cancel format, press [minus/NO] button before pressing the [plus/YES] button in step 3.

NOTE
If no media is found or initialization is failed, an "Err" message and the error code will appear alternately on the display.

3	Start the format.
Press the [plus/YES] button.
When the format operation is finished, an "End" message appears on the display.

4	Exit from format mode.
Press the [minus/NO] or [plus/YES] button to exit from format mode.

CAUTION
The format operation overwrites any previously existing data. Make sure that the media you are formatting does not contain important data. Proceed with caution, especially when connecting multiple USB storage media.

This is the end of the file.